This Multi-purpose communication cable testing device can test RJ45 network cable and RJ11 Telephone cable as well as testing LAN cable and phone output ports in your office or home, easy and convenient to clarify the connecting condition. Efficient scan for the missing wiring, disorder cable, open and short circuit as well as crossover circuit.
The circuity status testing function of ''Cable Checker"can determine the basic natures of testing circuit.The testing task can be complete only via the emitter,rather than receiver.Please insert one port of crocodile clipsha ped adapter cable into the RJ11 socket of the emitter then let the testing circuit help tightly by the red-black cable clip located in other end of the adapter.
- RJ45 and RJ11 Communication Cables Scanning and Testing Device
- Testing RJ45 LAN Network cable
- Testing RJ11 telephone cable
- Testing open end phone cable with clip adapter
- Testing the RJ45 output port and RJ11 output port in office or home
- Lines communication scanning and testing device
- Breakthrough simulation type signaling
- Ends cable location confusion, decisively rejects noise and false signals
- Locates cable quickly from a distance, even on an active network
- Isolates cable and wiring preciously from a bundle, despite cable bleed
- Audio sound for easy verification
- Validates correct end-to-end cable wiring and identifies telecom/ datacom services
- Scan cable-proofreading cable automatic cut over function
The Function of Checking Cables:
- This "CABLE TESTER" will help you to check and find the twin cables in need among so many cables in no time
- Plug one port of the cable testing(such as the port of extension line or the port of computer network cable) into the RJ-45 jack or RJ11 jack on the emitter (or via the adapter cable),and move the switch on the emitter to the "SCAN" position. It shows a normal work if the "status" LED flashes.
- Push to test on the receiver and the "Power" LED flashes, then detect the sound "toot" from the speaker on the receiver around another port of the cable testing(such as cable layout shelf of telephone system, junction box, and hub port of computer)
- Then compare the volume of the "toot" sound, the twin cables which makes the highest sound of "toot" are the one to be found.
The Function of Verifying Cables:
With the verifying function of the "CABLE CHECKER", it will be very fast to test the basic physical connecting feature of open and short and cable Sequence Status on The Cables Below:
- The UTP computer network cable which adopts the standard of 10 Base-t EIA/TIA 568A, EIA/TIA 568B, AT&T258A, Token Ring
- The telephone cable of 2 pin/4 pin
- Other metal connecting cable
- Plug one port of the cable testing into the RJ45 jack on the emitter(or connect them with cable adapter). Move the function switch on the emitter to the "TEST" position, it shows a normal work when the "VERIFY" LED flashes.
- Connect another port of the cable testing with the RJ45 jack on the receiver(or connect them with cable adapter). The status of good and NG of the cable circuit can be judged by the 4 indicator light on the emitter or on the receiver of cable status(as the illustrator in the table: 1, 2, 3, 4, 5, 6, 7, 8)
Low Voltage Alarm Function:
Push DIP switch on emitter to position of "SCAN", in case that battery level is lower than 6.0V, "STATUS" and "VERIFY" indicators will light up at the same time, it means battery replacement is needed.
2* 6F22 9V Batteries
1* RJ-11 Telephone Cable
1* RJ-45 Network Cable
1* Cable with Crocodile Clamp
1* Instruction for Use
- The max working current:Emitter: ≤20mA
- Signal transmission format: Multi-frequency impluse
- Signal output electric status: 8Vp-p
- Distance of signal transmission: ≥3km
- Launcher size: 130 *60 *33mm
- Receiver size: 210 *35 *25mm
- Power by: DC,9V battery
- Weight: Launcher :0.071kg
- In retail packing