This GSM Wireless alarm system adopts SMS data message and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detector will send alarm signal to host immediately, and the host will send SMS alert message to pre-set mobile phone numbers automatically and drive wiretap. In addition, user can dial the system and set it in arm/disarm mode by any phone.
Specifications:
- Using micro-computer to operate the alarm system, it can prevent theft, detect gas leakage, smoke fire
- GSM Control Wireless Intelligent Security and Protection Alarm System, 3-Relay Outputs
- 14 zones guarding: 2 wired zones and 12 wireless zones
- GSM Wireless remote control to activate/deactivate through GSM mobile phone system.
- The micro-computer auto calling reporting system can programmed a maximum of three (3) telephone numbers it can be to a mobile phone or fixed line phone
- The micro-computer auto sending SMS alert message to programmed a maximum of three (3) mobile phone numbers
- The host automatically stores system status, while its power is off
- The system equips backup rechargeable battery power in case of external power off
- Report the guarding zones by SMS or voice and monitor the voice at the site remotely
- Remote arm/disarm, and set the host by wireless keyboard, SMS or any phones
- Connector with the alarm center through GSM network
- Each zone has independent arm/disarm function
- 3 relay outputs to control your home appliances
- Works with external microphone
- Works with external speaker
- Pre-record a voice message in the system and playback when system is alarmed
- System password protection
- GSM weak signal reminder
- External power failure or line cut off alarm function
- GSM network frequency: 850MHz/1900MHz or 900MHz/1800MHz
- Alarm response time: less than 10 seconds (GSM in normality)
- Remote control panel
- LED indicators
- GSM SIM card and Phone line in sockets
- Siren: more than 110dB loud alarm
- Power input socket
- AC/DC adapter included: AC 100V - 240V 1A, DC 9V 2A
- Standby battery: DV 7.4V, 800mAH
- Standby battery working time: more than 10 hours
- Relay contact output 3:Â 3A, 120VAC; 3A 24VDC
- Accessories: 1 x Remote control panel, 2 x remote controllers, 1 x Wireless infrared detector, 1 x Wireless magnetic door/window entry detector, 1 x Siren, 1 x hanging bracket, 1 x AC/DC adapter, User manual
- In retail packaging
Wireless Infrared Detector:
- Wide-range PIR detector
- The time delay of setting: 20 Seconds
- Intermission: 2 Seconds
- Power by internal battery
- Deselecting Range: 8M
- Deselecting Angle: 110 Degree
- Holding bracket included
- Telescope antenna
- Easy installation